| Physical ports | |
|---|---|
| Port configuration |
32 40/100GbE QSFP28 ports |
| Management Port |
Out-of-band management port (RJ-45, 10/100/1000Base-T) |
| Console Port |
1 (RJ-45) |
| USB |
USB 2.0 |
| Performance | |
|---|---|
| Switching capacity |
6.4Tbps |
| Maximum forwarding rate |
3.3Bpps |
| Latency |
Ultra-low latency |
| Major Components | |
|---|---|
| ASIC |
Broadcom TD3 56870 |
| CPU |
Intel Atom Denverton, TPM 2.0 |
| Memory |
8GB DDR4 with ECC |
| Storage |
128GB M.2 SATA for storage |
| Layer 2 Features | |
|---|---|
| Switching Mode |
Store-and-Forward |
| Spanning Tree |
802.1w
802.1s
Auto Edge |
| VLAN |
IEEE 802.1Q Tagged Base
Port-based
QinQ (802.1ad) |
| Storm Control |
Broadcast
Unknown Multicast
DLF (Unknown Unicast) |
| IGMP Snooping |
v1/v2/v3
v1/v2 Querier
Immediate Leave |
| MLD Snooping v1/v2 | |
| Link Aggregation |
Dynamic Load Balancing (DLB)
802.3ad with LACP
Static Trunk
Unicast/Multicast Traffic Balance over Trunking Port
LACP Fallback |
| Link State Tracking | |
| Port Backup | |
| Loopback Detection | |
| Private VLAN | |
| Link Debounce | |
| QoS Features | |
|---|---|
| Scheduling for priority queue |
WRR
Strict
Hybrid |
| COS |
802.1p
IP TOS precedence
DSCP |
| DiffServ | |
| iSCSI optimization | |
| Security Features | |
|---|---|
| Static and dynamic port security (MAC-based) | |
| 802.1x (MD5, MS-CHAPv2) |
Port-based
MAC-based
Auto VLAN assignment
Guest VLAN
Unauthenticated VLAN |
| Access Control List |
L2/L3/L4 |
| IPv4/IPv6 ACL |
L3/L4 |
| RADIUS/TACACS+ |
Authentication, Authorization, Accounting |
| SSH V2.0 | |
| User name and password |
Local Authentication |
| Management IP filtering |
SNMP
Telnet
SSH |
| IP Source Guard | |
| Dynamic ARP inspection (DAI) | |
| DHCP snooping |
IPv4
IPv6 |
| SSH Public Key Authentication | |
| Signed firmware image | |
| Control Plane Policing / CoPP | |
| Service Prohibit Access | |
| Role Base Access Control (RBAC) | |
| Layer 3 Features | |
|---|---|
| IPv4 unnumbered interfaces | |
| IP Multinetting/CIDR |
IP Multinetting/CIDR |
| /31 subnets | |
| Proxy ARP | |
| Static route |
IPv4
IPv6 |
| OSPF v2/v3 | |
| ECMP |
Dynamic Load Balancing (DLB) |
| BGP4 | |
| IGMP v1/v2/v3 | |
| PIM-SM/-SM6 | |
| SSM | |
| MLD v1/v2 | |
| VRRP v2 | |
| Policy-Based Routing (PBR) | |
| BFD | |
| VRF Lite | |
| Black Hole Detection (BHD) | |
| VRRP v2/ v3 | |
| IP SLA | |
| Supported Optics and Cables | |
|---|---|
| Supported Optics and Cables |
DAC cable (QSFP+): 1m, 3m, and 5m
DAC cable (QSFP+, fan-out): 1m, 3m, and 5m
DAC cable (QSFP28): 1m, 3m, and 5m
DAC cable (QSFP28, fan-out): 3m
AOC cable (QSFP+, 850nm, MMF): 7m and 10m
AOC cable (QSFP28, 850m, MMF): 1m, 3m, 5m, and 10m
40G optic (QSFP+, MPO, 850nm, MMF): 40GBASE-SR4
40G optic (QSFP+, LC, 1310nm, SMF): 40GBASE-LR4
100G optic (QSFP28, MPO, 850nm, MMF): 100GBASE-SR4
100G optic (QSFP28, MPO, 1310nm, SMF): 100GBASE-PSM4
100G optic (QSFP28, LC, 1310nm, SMF): 100GBASE-LR4 |
| Ordering Information | |
|---|---|
| Ordering Information |
T7032-IX7D (1IX7U7Z0002) Front to Back, with Rail Kit
T7032-IX7D (1IX7U7Z0003) Back to Front, with Rail Kit |
| Management Features | |
|---|---|
| IP helper | |
| IPv4 Device Tracking | |
| PTP Transparent Clock 1-step E2E (1588 1-Step end-to-end transparent clock) | |
| Industrial standard command-line interface | |
| CLI filtering | |
| CLI schedule | |
| SSH | |
| Software Update |
TFTP
SCP
SFTP |
| Configuration download/upload |
TFTP
SCP
SFTP |
| Dual Images | |
| SNMP v1/v2c/v3 | |
| SNMP inform v2 | |
| RMON1 Groups: 1, 2, 3, 9 | |
| DHCP client | |
| DHCP relay (VxLAN environment supported) | |
| Remote PING | |
| Traceroute | |
| NTPv4 | |
| LLDP |
802.1ab
802.MED
Potential error detection |
| UDLD | |
| Port mirroring |
SPAN
RSPAN |
| EVENT / Error log | |
| sFlow v5 | |
| Email alerting |
SMTP |
| Error-Disable Recovery | |
| IPv6 Management | |
|---|---|
| IPv4/IPv6 Dual Protocol Stack | |
| ICMPv6 | |
| ICMPv6 Redirect | |
| IPv6 Neighbor Discovery | |
| Stateless Autoconfiguration | |
| Manual Configuration | |
| DHCPv6 client/relay | |
| SNMP over IPv6 | |
| SSH over IPv6 | |
| IPv6 DNS Resolver | |
| IPv6 RADIUS | |
| IPv6 TACACS+ | |
| IPv6 Syslog | |
| IPv6 TFTP |
| High Availability | |
|---|---|
| Multi-Chassis Link Aggregation (MLAG) |
– IGMPv1/v2/v3 SNP and MLDv1/v2 SNP
– Standalone mode
– L2/L3 unicast
– RSTP/MSTP
– VXLAN |
| In-Service Software Upgrade (ISSU) | |
| Data Center Features | |
|---|---|
| Anycast gateways | |
| Priority-based Flow Control (802.1Qbb) |
802.1p
IP-DSCP |
| DCBX |
DCBX for ETS
DCBX for PFC
PCBX for Application Priority |
| FCoE Initiation Protocol (FIP) snooping | |
| RoCEv1/v2 | |
| PFC watchdog (DCBx supported) | |
| Automation | |
|---|---|
| Auto installation | |
| Zero Touch Provision (ZTP) | |
| RESTful API | |
| Ansible | |
| NETCONF/RESTCONF |
| Virtualization Features | |
|---|---|
| VxLAN Switching/Routing | |
| BGP-EVPN Route Support |
Ethernet autodiscovery Route (Type-1)
MAC with IP advertisement Route (Type-2)
Inclusive multicast Ethernet tag Toute (Type-3)
Ethernet segment Route (Type-4)
IP prefix Route (Type-5) |
| Multihoming Designated Forwarder election enhancement (RFC8584) | |
| SDN | |
|---|---|
| OpenFlow v1.3 |
| Mechanical | |
|---|---|
| Dimension (HxWxD) |
44 x 440 x 508mm |
| Weight |
9.33kg/20.55lbs (NET) |
| Environmental Specifications | |
|---|---|
| Operating temperature |
0~45°C |
| Operating humidity |
90% maximum relative humidity |
| Power | |
|---|---|
| PSU |
100~240VAC, 50/60Hz, 750W*2 (1+1) |
| Power consumption |
Idle Mode: 217W
Normal Mode: 293W |
| Safety | |
|---|---|
| Safety |
UL, cUL, CB |
| EMC | |
|---|---|
| EMC |
CE, FCC, VCCI, CCC |
| RoHS | |
|---|---|
| RoHS |
Reduction of Hazardous Substances (RoHS) 6 |
Speak with an expert to learn more.
Copyright © 2023 Taknet Systems Pte Ltd. All Rights Reserved.