• QCT

QuantaMesh T1048-LB9M

OVERVIEW

QuantaMesh T1048-LB9M is a high-performance and power efficient L2/3 switch designed in a 1RU form factor. QuantaMesh T1048-LB9M is purpose built as the rack management switch for high density data center deployments. With 48 ports of 10/100/1000 and 4 integrated 10/25GbE SFP28 ports the switch delivers non-blocking forwarding of 296Gbps combined with feature rich L2 and L3 functions. QuantaMesh T1048-LB9M with QNOS (Quanta Network OS) supports not only layer 2 functions but also the advanced layer 3 features, including OSPF, BGP, and ECMP. In order to fulfill the demands for contemporary data center management switch, QuantaMesh T1048-LB9M supports the features for data center application such as OpenFlow v1.3 for software-defined networking and Restful API and Ansible for networking automation capability.

Categories

Download datasheet

Product Specifications

Physical ports
Port configuration
48 10/100/1000BASE-T and 4 10/25GbE SFP28 ports
Management Port
Out-of-band management port (RJ-45, 10/100/1000Base-T)
Console Port
1 (RJ-45)
Performance
Switching capacity
296Gbps
Maximum forwarding rate
220Mpps
Major Components
ASIC
Broadcom StrataXGS Hurricane3-MG
CPU
Embedded ARM A9 1.25GHz
Memory
2GB DDR4 SDRAM
Flash
128MB
Storage
8GB SD
Layer 2 Features
Switching Mode
Store-and-Forward
Spanning Tree
802.1w
802.1s
Auto Edge
VLAN
IEEE 802.1Q Tagged Base Port-based QinQ (802.1ad)
802.3x Flow Control (Pause Frames)
Storm Control
Broadcast
Unknown Multicast
DLF (Unknown Unicast)
IGMP Snooping
Link Aggregation
802.3ad with LACP (64 groups)
Static Trunk
Unicast/Multicast Traffic Balance over Trunking Port
LACP Fallback
Loopback Detection
Link Debounce
QoS Features
Scheduling for priority queue
WRR Strict Hybrid
COS
802.1p
IP TOS precedence
DSCP
DiffServ
Security Features
Static and dynamic port security (MAC-based)
802.1x (MD5, MS-CHAPv2)
Port-based
MAC-based
Auto VLAN assignment
Guest VLAN
Unauthenticated VLAN
MAC Bypass
Authenticator
Access Control List
L2/L3/L4
IPv4/IPv6 ACL
L3/L4
RADIUS/TACACS+
Authentication, Authorization, Accounting
SSH V2.0
User name and password
Local Authentication
Remote Authentication via RADIUS/TACACS+
AAA
Management IP filtering
SNMP Telnet SSH
IP Source Guard 1K
Dynamic ARP inspection (DAI)
DHCP snooping
IPv4 IPv6
SSH Public Key Authentication
Signed firmware image
Control Plane Policing / CoPP
Service Prohibit Access
Role Base Access Control (RBAC)
Layer 3 Features
IPv4 unnumbered interfaces
IP Multinetting/CIDR
/31 subnets
Proxy ARP
Static route
IPv4 IPv6
OSPF v2/v3
ECMP
BGP4
IGMP v1/v2/v3
Policy-Based Routing (PBR)
BFD
ECMP support
VRF Lite
VRRP v2
IP SLA
Supported Optics and Cables
Supported Optics and Cables
DAC cable (SFP+): 1m, 3m, and 5m
DAC cable (SFP28): 1m, 3m and 5m
AOC cable (SFP+, 850nm, MMF): 1m, 3m, 7m, 10m, 20m, and 100m
AOC cable (SFP28, 850nm, MMF): 1m, 3m, 7m, 10m, 20m, and 100m
10G optic (SFP+, LC, 850nm, MMF): 10GBASE-SR optic
10G optic (SFP+, LC, 1310nm, SMF): 10GBASE-LR optic
25G optic (SFP28, LC, 850nm, MMF): 25GBASE-SR
Ordering Information
Ordering Information
T1048-LB9M (1LB9BZZ000Q) (F-2-B,AC)
T1048-LB9M (1LB9BZZ000P) (B-2-F,AC)
DNS Client
Management Features
IP helper
Industrial standard command-line interface
CLI filtering
CLI schedule
SSH
Software Update
TFTP SCP SFTP
Configuration download/upload
TFTP SCP SFTP
Dual Images
SNMP v1/v2c/v3
SNMP inform v2
RMON1 Groups: 1, 2, 3, 9
DHCP client
DHCP relay (VxLAN environment supported)
Remote PING
Traceroute
NTPv4
LLDP
802.1ab
802.MED
Potential error detection
UDLD
Port mirroring
SPAN RSPAN
EVENT / Error log
sFlow v5
Email alerting
SMTP
Auto Install
Error-Disable Recovery
SNTP
IPv6 Management
IPv4/IPv6 Dual Protocol Stack
ICMPv6
ICMPv6 Redirect
IPv6 Neighbor Discovery
Stateless Autoconfiguration
Manual Configuration
DHCPv6 client/relay
SNMP over IPv6
SSH over IPv6
IPv6 DNS Resolver
IPv6 RADIUS
IPv6 TACACS+
IPv6 Syslog
IPv6 SNTP
IPv6 TFTP
High Availability
Multi-Chassis Link Aggregation (MLAG)
– IGMPv1/v2/v3 SNP and MLDv1/v2 SNP – Standalone mode – L2/L3 unicast – RSTP/MSTP – VXLAN
In-Service Software Upgrade (ISSU)
Automation
Auto installation
RESTful API
Ansible
SDN
OpenFlow v1.3
Mechanical
Dimension (HxWxD)
43.2 x 440 x 394mm
Weight
5.8kg/12.78lbs (NET)
Environmental Specifications
Operating temperature
0~45°C@altitude:up to 900m
0~40°C@altitude:up to 3048m
Operating humidity
90% maximum relative humidity
Power
PSU
100~240VAC, 50/60Hz, 120W*2 (1+1)
Power consumption
Idle Mode: 43W Normal Mode: 50W
Safety
Safety
UL, cUL, CB, CCC
EMC
EMC
CE, FCC, VCCI, CCC
RoHS
RoHS
Reduction of Hazardous Substances (RoHS) 6

Speak with an expert to learn more.

Company

Facebook Linkedin

Get In Touch

Copyright © 2023 Taknet Systems Pte Ltd. All Rights Reserved.